厦门市MedAccred_AC8121电子电缆和线束组件的审核标准 （92）

40.3.2 P- Is there a procedure for the specification of mechanical tests that assemblies are required to undergo?YES/NO

40.3.3 P- Does the procedure for mechanical testing of crimping tools while in use ensure they are verified at minimum every thirty (30) days?YES/NO

40.3.4 P- Is there a procedure for tensile testing?YES/NO

40.3.5 P- In the absence of a documented process control program, does the procedure for tensile testing of hand crimp tools ensure the testing interval is once per day for each combination of tool, wire, and contact?YES/NO/NA

Audit Note: NA applies only when there is a documented process control program.

40.3.6 P- In the absence of a documented process control program, does the procedure for tensile testing of machine crimp tools ensure the testing intervals is at least once per applicator set up and monthly and are the results recorded?YES/NO/NA

Audit Note: NA applies only when there is a documented process control program.

40.3.7 P- Does the procedure for contact retention testing ensure that, unless otherwise established, the “push-click-pull” method shall be used?YES/NO

40.3.8 P- Does the procedure for contact retention testing ensure that, unless otherwise established, the “push-click-pull” method shall be used?YES/NO

40.3.9 P- Is there a procedure for crimp height testing, which includes defined values for maximum flash height, true crimp height, and width (for noncircular crimps)?YES/NO

40.3.10 P- If required by customer, is there a procedure for crimp force monitoring, including verification of acceptable crimps using either crimp height or pull force testing before referencing the crimp force monitor?YES/NO/NA