15W甲类分立管功率放大器电路图
,提供15W的不失真功率在8欧姆负载的时候。Q1 经营在共同的放射器, 输入信号通过对偏压管子包括Q8,Q9 、D6 、D13 和D14 。Q8 和Q9 提供恒流偏压, 产品阶段减到最小由分离darlington 对(Q2,q4)形成并且(Q7, q11) 。前二支晶体管是力量Transitors, 具体地2N3055 和MJ2955 。7.02K 电阻器, R16 被做了使用4.7K 、680 欧姆, 和二820 欧姆的系列组合。1.1K 电阻器, R3 被做了使用一100 欧姆和1K 电阻器。
Thisamplifier uses a dual 20 Volt powersupply and delivers 15 watts RMS into an 8 ohm load. Q1operates in common emitter, the input signal beingpassed to the bias chain conSISting of Q8, Q9, D6, D13 and D14. Q8 and Q9 providea conSTant current through the bias chain tominimize distortion, the output stage formed by a discrete darlingtonpaIR (Q2,Q4) and (Q7,Q11). The last twotransistors are power Transitors, specifically the 2N3055 and MJ2955.The 7.02K resistor, R16 was made using a seriescombination of a 4.7K, 680 Ohms, and two 820 Ohms. The 1.1Kresistor, R3 was made using a 100 Ohms and a 1K resistor. You canuse this circuit with any walkman or CD player since itis designed to take a standard 500mv RMS signal.
Thisamplifier uses a dual 20 Volt powersupply and delivers 15 watts RMS into an 8 ohm load. Q1operates in common emitter, the input signal beingpassed to the bias chain conSISting of Q8, Q9, D6, D13 and D14. Q8 and Q9 providea conSTant current through the bias chain tominimize distortion, the output stage formed by a discrete darlingtonpaIR (Q2,Q4) and (Q7,Q11). The last twotransistors are power Transitors, specifically the 2N3055 and MJ2955.The 7.02K resistor, R16 was made using a seriescombination of a 4.7K, 680 Ohms, and two 820 Ohms. The 1.1Kresistor, R3 was made using a 100 Ohms and a 1K resistor. You canuse this circuit with any walkman or CD player since itis designed to take a standard 500mv RMS signal.
15W甲类分立管功率放大器电路
赞 (0)