安康市MedAccred _AC8102热处理基准审核标准【22】
13.12 Hardness Testing SECTION NA
13.12.1 (EC) Hardness Testing
REQUIREMENT |
SHOP PAPER REQUIREMENT |
ACTUAL |
|
Hardness/Tensile range |
(EC) |
(EC) |
(EC) |
Hardness converted from Tensile |
(EC) |
(EC) |
(EC) |
Samples or Parts tested |
(EC) |
(EC) |
Only record if a part or sample was tested |
Test frequency |
|||
Converted hardness recorded |
(EC) |
(EC) |
(EC) |
13.12.2 Does the hardness obtained conform to specification? YES/NO
13.12.3 Is the operator currently qualified and/or certified to perform Hardness Testing? YES/NO
13.13 (EC) Conductivity Testing
REQUIREMENT |
SHOP PAPER REQUIREMENT |
ACTUAL |
|
Conductivity range |
(EC) |
(EC) |
(EC) |
Test method |
(EC) |
(EC) |
(EC) |
Samples or Parts tested |
*record if sample or part tested |
13.13.2 Does the conductivity obtained conform to specification? YES/NO
13.13.3 Is the operator currently qualified and/or certified to perform Conductivity Testing?
YES/NO
13.14 Additional Periodic and Lot testing required: (Charpy impact, Tensile test, Fracture toughness, Metallographic and/or Microhardness tests, etc.) SECTION NA
13.14.1 (EC) Additional testing required by the specification:
13.14.2 (EC) Shop paper requirement for additional testing: