乐高IDEAS系列2018年第一次评选的十款作品
更多精彩等你发现！
HAVE FUN EVERYDAY
昨天，乐高公布了2018年第一期的IDEAS投稿的作品，而这一次的10款作品是不是都让你觉得很精彩呢？我们一起来看看！
Embraer A-29 Super Tucano (Smoke Squadron)
作品地址：https://ideas.lego.com/projects/a4d585a8-02cc-4a3d-b485-8f606ff8a02c
ENGLISH:
Hello Everyone and welcome to my latest project! Well, a bit different one... :)
I usually build cars, but today I have a different, yet amazing, creation to offer. This is the Embraer A-29 Super Tucano, a light attack, advanced training, multi-purpose military turboprop, used by 10 countries from 3 continents, including Brazil itself, where it was born. This Specific version is from Brazilian Air Force's Smoke Squadron, a.k.a. Esquadrilha da Fumaça da FAB, that is focused on pacific air demonstration instead.
The seven airplanes that constitute the squadron perform amazing air stunts that will leave you amazed if you see in video, and speechless if you see live. My attempt of recreating the Smoke Squadron A-29 is shown in the following pictures. My airplane features:
- Retractable landing gear;
- Movable rudder and elevator;
- Stand for Display;
- Removable canopy for inside look; and
- Spinnable 5-blade propeller.
The propeller is unique, since it is brick-built (TLC does not offer a 5-bladed one). This replica is ~1:39 scaled and has around 400 bricks.
So, if you liked it, could you please give your support? I'd be so glad!
Thank you a lot for your time and have a nice day!
Alex
MOCOZONE观点
这款作品目前来看，并不是十分惊艳，甚至可以说作为一款MOC作品，有些“官方”味道，欠缺一些。因为怎么看都和乐高推出的创意系列3合1类似。这款是巴西航空工业公司A-29超级巨嘴鸟（烟雾中队）的模型飞机，只能说在这个主题上，选的可能更好，如果这个作品能被乐高最终亲睐。那么相信成品的改变一定会是巨大的。因为好的飞机MOC作品太多了。
这个作者之前也多次投稿IDEAS，而大多数是车辆，其实他的车辆做的很不错。只是没有一次获得1W票，这次的小飞机竟然很顺利的通过了。
可能被选指数：★★☆☆☆
SR-71A The Final Flight
作品地址：https://ideas.lego.com/projects/a0a7940a-e575-420f-ace5-2b7bd3d962c7
SR-71A - NASA 844 - The Final Flight
On October 9th 1999, NASA performed the final flight for the entire SR-71 fleet in the SR-71A aircraft designation NASA 844.
NASA crews flew four Lockheed SR-71 airplanes during the 1990s. Two were used for research and two to support Air Force reactivation of the SR-71 for reconnaissance missions. The aircraft was 107.4 feet (32.73 meters) long, had a wingspan of 55.6 feet (16.94 meters), and stood 18.5 feet (5.63 meters) high (from the ground to the top of the rudders when parked). Aerodynamic control surfaces consisted of all-moving vertical tail fins above each engine nacelle and elevons on the outer wings and trailing edges between the engine exhaust nozzles.
The airframes were built almost entirely of titanium and other exotic alloys to withstand heat generated by sustained high-speed flight. Capable of cruising at Mach 3 continuously for more than one hour at a time, the Blackbirds provided a unique research platform for thermal experiments because heat-soak temperatures exceeded 600 °F.
SR-71A (61-7980/NASA 844) was built on the 16th May 1967 and first flew on 25th September 1967. NASA 844 arrived at Dryden on Feb. 15, 1990. It was placed into storage until 1992 and served as a research platform until its final flight on October 9, 1999.
This was the final flight for the entire fleet of SR-71s, the fastest, and in my opinion, the greatest plane to ever grace the sky.
My Lego SR-71 is built to a minifig scale of 1 stud/ft representing the NASA 844 aircraft to compliment the other excellent LEGO NASA models. It is shown with the engine starter and pilot in the custom pressurised suit, and if you splash a bit of water under it, it will look like the real one leaking fuel on the tarmac.
Construction has been done using a simpler slope configuration on the fuselage. You can achieve a more accurate shape with curved slopes and hinges but it is not as sturdy or kit friendly. Wing shape has been achieved using standard wedge plates. A lot of SNOT techniques are used in the J58 Engines to maintain shape and provide support for the wing.
The SR-71 is still a popular plane today across all generations as it has appeared in a number of movies and computer games as it is so easily recognisable. Thank you for your support.
Approx number of pieces: 1000
MOCOZONE观点
又是一款NASA的相关作品，而这款来自美国国家航空航天局的SR-71A黑鸟侦察机来自洛克希德，1999年正式退役，我们在近几年能看到其身影可能还是《变形金刚》电影版中的天火造型。
目前这款作品的还原度还是很好的。而且乐高近年多次涉及NASA的主题IDEAS作品，相信这款也应该是考虑之一，只是在一些细节上，还是需要优化的，比如后引擎喷口的部分以及机头的一些细节。作者采用了1000个零件来制作，这个零件数量也是乐高比较喜欢的。
可能被选指数：★★★★☆
Treehouse
作品地址：https://ideas.lego.com/projects/ab7ac32b-e713-489d-bdc6-e14b22738ba8
Since my early childhood I have been fascinated by construction and modelling.
That's why I was excited to receive new Lego boxes for christmas or birthday. I loved to constructed them but i was more excited to use this new bricks for my own creations.
Passionated by nature, wildlife and wood constructions, I concretized this project about childhood dreams and travel. The idea was emerged during a unusual week-end with friends in treehouses, such as Robinson Crusoé.
Project name: Treehouse
Story: It's a aventurers' family which rebuild their life after being lost. Using recovered materials, they adopted a tree as a new place to live.
Total parts: 2643
Creation time: about 600h
Details:
-3 aventurers' minifigures (man, woman, child)
-animals (cat, parrot, frog, spider)
-3 wooden cabins (2 bedrooms and 1 bathroom)
-detachable cabins clip-on tree and roofs clip-on cabins
-scale of treehouse respected compared to minifigures
Thanks for your support and comments :-)
MOCOZONE观点
树屋，主题非常好，而且整体的造型看起来有点像星战的小熊村。目前个人觉得在树干部分可能可以再优化一下，而作者所给出的2643的零件数，这样一个中大型套装可能不是乐高IDEAS系列一直推荐的。
可能被选指数：★★★☆☆
Stitch
作品地址：https://ideas.lego.com/projects/ef31dc6a-6a39-4c8d-8dfa-57c64550c390
From Disney's Lilo and Stitch, its everyone's favorite genetic experiment, Stitch!
Stitch highly poseable. With 13 points of articulation he can truly capture the character and personality of Lilo's lovable blue 'dog'. He would make a great addition to anyone's ohana with all the cuteness and charm and absolutely no destruction and mayhem. The overall design is quite simple making it perfect for kids and adult to build. At 7 inches tall he'd be right at home on a desk at the office or in a kid's room. The ball joints and hinged elements make him easy to change from one pose to another. The design is also ready for adaptations like adding Stitch's extra set of arms and antennas.
Ohana means family, and family means nobody gets left behind, or forgotten. So don't forget to vote and make Stitch a part of the LEGO ohana.
MOCOZONE观点
星际宝贝：史迪奇，迪士尼的可爱动画角色，也是非常受小朋友喜欢的形象。而作者Legohaulic对于这款形象的积木表达明显很到位。颜色运用也很还原，使用了球形关节作为四肢的链接，也可以看到这款史迪奇的可动很好。目测零件数应该在600左右，相信在迪士尼与乐高的合作密切度上来说，这款会比较受到亲睐。
可能被选指数：★★★★★
Modular Arcade
作品地址：https://ideas.lego.com/projects/eb98cce3-bb35-48ed-9aa0-3ec800b554a6
Hello!
I've always wanted to make a Modular Arcade for quite some time, but didn't know where to start (this inspiration happened around the same time I came out of my LEGO dark ages). Many new elements were introduced, which can be overwhelming especially after 9 years. But after practicing and relearning the ingenuity of new and old LEGO bricks, I made what I believe is my best model yet. This Modular Arcade includes 3 main floors: Pizzeria, Arcade, and Apartment. Details are listed below.
Exterior:
Phone booth
Coin operated spaceship ride
Rooftop with lounge chairs, plants, pergola, and fire pit
Pizzeria Floor:
Pizza slices
Pizza boxes
Brick oven
Fountain drink dispenser
And more!
Arcade Floor:
Prize counter
Skee ball
Hockey table
Dancing game
Classic arcade machine
Racing arcade machine
Blaster arcade machine
Claw machine
Apartment Floor:
Kitchen
Living room with couch and TV
Bedroom with bed
Bathroom with shower, toilet, and sink
There are many more details throughout the model that it would take a while to list them all. I'll leave them for you to discover!
Anways, thanks for visiting! Any feedback or criticism is greatly appreciated.
MOCOZONE观点
这款街景的建筑模型外表看起来可能并不是那么出色，但是内部的细节简直让你觉得棒极了。厨房，客厅，游戏室是一应俱全，而那个厕所都做的有模有样。作者投稿的作品是软件模拟效果图，也许实物的话看起来会更棒。搭载了8个人仔，只是乐高是不是会亲睐建筑的IDEAS，目前来看，除了生活大爆炸之外，好像乐高对于街景样式并不很感兴趣，只有像渔夫老铺那种有味道的外表可能乐高会更喜欢一些。
可能被选指数：★★★☆☆
I am Amelia Earhart
作品地址：https://ideas.lego.com/projects/6e99ac19-94bf-4470-8159-9eae6ba22f1e
Now you can say: "I am Amelia Earhart!”
Amelia Earhart was a girl who loved adventure, and never let anybody stop her from trying new things. Even things that girls had never done before—like flying all the way across the Atlantic Ocean. Eventually she broke flying records and proved to the world that women can soar just as high as men.
Based on the bestselling book series by Brad Meltzer and Chris Eliopoulos, this set consists of the bright yellow biplane that Amelia Earhart bought for herself. She named it Canary (which is a cool name for a plane, right?).
Plus, you get an Amelia Earhart minifigure!
This set has a wonderful educational value, but it’s also downright fun. Fly! Zoom! And of course, soar!
The presented set consists of 186 parts. Please support it if you’d like to see it as a real product. Our true goal is to then give you the rest of the heroes in the book series: I am Abraham Lincoln, I am Rosa Parks, I am Albert Einstein, and so many more…
Help give your kids real heroes.
Like the book says: I am Amelia Earhart. I know no bounds. And I hope you’ll remember that the greatest flight you’ll ever take is the one no one has tried before.
MOCOZONE观点
又是一款飞机作品，而这个的背景设定显得更有意思一些，这是一本同名的漫画书为题材，讲的是一名阿梅莉亚·埃尔哈特的女孩的飞行梦，而这个女孩也是真实的飞行员，来自美国，并且是第一名独自飞行跨越大西洋的女飞行员。有着浓厚的传奇色彩。而作品的这架飞机看起来要更出色一些，并且搭载人仔的更合适，如果作品入选，觉得乐高也会对作品进行一定幅度的修改，比如起落架可折叠等。
可能被选指数：★★★★☆
LEGO Mystery Science Theater 3000
作品地址：https://ideas.lego.com/projects/577fb21b-654e-4add-91c6-0cfe4677a49c
In the not-too-distant future, next Sunday A.D... there could be a LEGO set based on one of the most iconic TV shows of all time! Mystery Science Theater 3000, or MST3K for short, is a show about a guy who gets shot into space by mad scientists and is forced to watch the worst movies of all time. He and his robot friends, Tom Servo, Crow T. Robot, Gypsy, and Cam-bot, make fun of the movie as it plays and perform comedy skits in-between the film to keep their sanity. The show went through numerous changes, with the main host changing from Joel to Mike, the Mads and robot's voices changing, even the entire sets changing. By the time the show ended in 1999, the entire cast was completely different from when it first began in 1989. Now, with a revival planned for release in late 2016, with a whole new cast and crew, there has never been a better time to commemorate!
Included in the set would be both of the show's unwilling hosts, Joel Robinson and Mike Nelson! Of course, all of the 'Bots from the show would be included as well: Cam-Bot, Gypsy, Tom Servo, and Crow! Every one of the Mads would be included in their locations as well; including Dr. Erhardt, TV's Frank, Professor Bobo, Brain Guy, and both Dr, Clayton and Pearl Forrester! The set would also include the Satellite of Love, the vessel that trapped Joel, Mike, and the Bots. The host room with "Movie Sign!" lights and buttons, famous hallway doors, and the theater will all be included! This show had talented writers, an original premise, and lasting pop cultural fame to this day. Thanks to Mystery Science Theater, we all take bad movies a little less seriously now, and laugh when there was nothing funny before.
MOCOZONE观点
Mystery Science Theater 3000 (MST3K) ,虽然我从来没有看过这个电视节目，不过能从查询到的信息来看，这个节目在国外确实非常受欢迎。我们应该可以翻译成神秘科学剧院3000，好吧，一定是一个恶搞怪趣味的节目。而从一些图片资料来看也确实这样。因为没有看过，所以对于作品想表达的意思也就不好评价。只是这个看起来人仔众多的套装，我想到了之前IDEAS的冒险时光套装，在国内反正是滑铁卢。以至于这个套装现在不到200元就能购买。这款是不是会被亲睐就不清楚了。
可能被选指数：★★☆☆☆
Acclamator Class Assault Ship
作品地址：https://ideas.lego.com/projects/4fd31e62-e604-4976-a085-77e503f6ebbc
Hello again everybody! This is my new and improved Lego Acclamator. The Acclamator was an assault-ship used by the Galactic Republic. These ships have participated in numerous space battles, and were also utilized to land clone troopers, AT-TEs, and other clone artillery on a planet. This iconic ship could serve as a display piece or playable model for Lego builders ranging from experts to beginners, or a die-hard Star Wars fan to a child building for the first time with his/her parent.
I decided to build an Acclamator because of its apparent transparency with Lego builders; it has not been a common ship constructed throughout the Lego community. So I took this as a challenge to build a unique, sophisticated, and beautiful Acclamator model, that is reminiscent of the fear and power associated with the classic Star Destroyer (a ship that every Star Wars fan loves!).
About 60 hours of LDD designing went into this model, especially regarding the frame as well as attempting to replicate all of the Acclamator's defining angles present in the actual model of the assault-ship. Some of the angles are subtle and others prominent, and I needed a sturdy frame to make sure that all of the pieces fit together properly. I used technic pieces and tried to maximize the amount of connections between parts in the frame. My favorite parts of the ship are the two slightly inward tapering sections: the center spine running down the middle of the ship, and the tail of the ship. Even though these are subtle details, they make the Acclamator appear more realistic and smooth, as it more closely resembles the actual ship.
What is different than my previous Acclamator model is the addition of interior features. There are separate "rooms" underneath the two triangular "top wings" of the ship. These wings are attached by several hinged pieces and can easily be removed and reattached. The four rooms include: medical area, turret controls, engine room, and a secret hatch room. The medical area includes two white swivel beds for injured clones/other patients, and could feature a 2-1B medical droid minifigure. The turret controls room features two stations for clone gunners, as well as an area containing ammunition canisters to replenish the turrets. The engine room contains pipes carrying fuel to the engines and a planning station to perform engine maintenance. Finally, the secret hatch room features a hatch (obviously) that can be covered and uncovered; secret supplies, small weapons, or ammunition can be stored here.
Thank you for taking the time to read about and view my creation! I greatly enjoyed designing this ship, and rendering the awesome realistic pictures (thank you POV-RAY and Bluerender!). Even though I'm in college (away from my bins of Lego D:) I will continue to keep designing and building! Thank you for reading, and thank you for your support!
MOCOZONE观点
阿克拉玛托级星舰，或翻译成海盗级突击舰，是帝国歼星舰的前身，在克隆人时期，这个战舰大量使用来运送克隆人士兵，我们看到其身影应该是在星战动画《义军突起》中。而在动画中，其身影更多的是有涂装的，而作者的这款一并的浅灰色，让人看起来稍有些乏味
从乐高2017年开始对星球大战UCS套装的设定来看，也是更加凸显细节与颜色搭配，在75192（千年隼）以及刚刚发布的75181（Y翼战机）中都可以看到设计方向的改变，色彩的明暗搭配也让载具看起来更生动。而对于星战题材，IDEAS一直没有涉及，因为乐高有单独的星球大战系列，这种大型载具也许只是更让玩家喜欢并非会真实推出（何况这战舰不说你估计都不知道吧？）
可能被选指数：★★☆☆☆
作品地址：https://ideas.lego.com/projects/95f87b23-1eea-41ca-a57d-81a9adda08fa
Build, display, and role-play with the Flintstones and Rubbles in Bedrock. The Flintstones car features luggage, a rotate open top for ease of minifigure placement and room for two seated and additional minifigures. The car can be dynamically positioned on its dirt path, and 'tip' over when the dinosaur ribs are attached. When the car and stand are placed next to the home they double as the driveway.
The Flintstones home features a rotate open front door, an interior with curtains, couch, TV, coffee table, lamp, phone, kitchen sink with faucet, and a bird powered music player! The roof segment with slight force slides out to help show and play with the interior.
The exterior features a wall, palm tree, flowers, and a dinosaur powered lawn mower! A Bedrock Sign is included with perched Dinosaur bird!
Includes 6 minifigures: Fred, Flintstone, Wilma Flintstone, Pebbles Flintstone, Barney Rubble, Betty Rubble, and Bamm Bamm Rubble. Dino might be added as an update.
Total part count including minifigures is 770
Growing up I enjoyed watching The Flintstones. I feel it both translates well, and would prove popular in brick form.
LEGO, should this get to review I will supply you with the Ldd file. I am open to you changing aspects of the design to suit your needs by choosing which minifigures you want, and deciding if you want the home roughly as shown, a reduced detail version, a facade, or not have it at all.
Thank you for your support and consideration.
MOCOZONE观点
《摩登原始人》，非常怀旧的一部动画片，其中动画的精彩程度还是自己去看看的好，而这个作品对于动画中很多细节的还原也是恰到好处。搭载了6个人仔，而设计的载具与他们的家与动画中也是十分还原。并且还有各种机关的可玩性，确实是一款非常出色的作品，只是在版权上，乐高是否会去购买这个版权而推出，就要看乐高的态度了，个人是十分喜欢这个作品的。
可能被选指数：★★★★☆
作品地址：https://ideas.lego.com/projects/ba271bcd-1624-40f9-bf0a-ae2db2f5b0d1
This is the 1967 BMW R60/2. Known across the world for its ruggedness and reliability, the R60 could provide a steady ride to rider and passenger alike. Nowadays, this vintage bike is still as reliable as it was 50 years ago.
This Lego model was made for a friend and fellow Lego enthusiast to commemorate his father, who would take him on rides in this very motorcycle through the countryside. It is constructed to match all the various specifications and details of the original bike, including the unique triangular front fork, hand brakes, a fuel tank, twin engines, a tire inflator, twin engines, and a side car (as of now still a work in progress), as well as a rotating handlebars and a retractable kickstand.
Do you want your stormtrooper to have a stunning R60 motocycle to ride? Give us a vote, you won't regret it!
MOCOZONE观点
当我看到这个作品入选，是非常兴奋的，因为这个设计师是来自我们台湾只有十几岁的阿亮，你一定不相信这样的作品是一个十几岁的孩子做到的，我已经关注他的Flickr有三年，其作品的成熟度真的是让很多成人AFOL都自叹不如的，而他设计的摩托多大十几款，各个都非常精细与还原。
作品更多详情：点击查看
在之前我也曾介绍过阿亮的其它作品，而这次入选IDEAS最终评选，我个人觉得胜算还是很大的，首先就是2017年乐高在科技系列推出的宝马R1200GS(42063)，乐高于宝马也是目前合作授权的，而阿亮的这款宝马老实摩托R60的还原度是更胜一筹，至于零件数量，我觉得这款不会超过21307卡特汉姆，所以作为车模产品对待还是很可以保证销量的。真的很希望这款可以最终胜出并量产。而阿亮的新作品也在IDEAS投稿投票中，是一辆哈雷Sportster XL，也是足够的吸引你的眼球。
作品地址：https://ideas.lego.com/projects/f8947bdb-1780-4702-8c80-d123b6d9c91d
可能被选指数：★★★★★
精彩的作品，来自JK BrickWork的乐高“木头鸭子”！
来自JK Brick设计的乐高“木头鸭子”，我拼好啦！
而格兰特的年纪只有19岁，所以能设计出这样精彩作品，同样是非常厉害。他最喜欢的乐高设计师是吉米（Jamie Berard）